$470.00
Single-shank ripper for 1 – 3.5 ton excavators. Replaceable hardened point, pin and bush kit supplied. Free tracked USPS shipping.
A single-shank ripper for mini excavators between 1 and 3.5 tons. It is the cheapest way to make hard ground diggable: frozen topsoil in winter, sun-baked clay in summer, compacted hardcore, old asphalt and root-bound ground that a bucket simply skates across.
The shank is a single curved plate rather than a fabricated box, so there is no weld seam in the highest-stress area, and the curve is deliberately shallow – a deep hook digs in and stalls a light machine. The point is a separate hardened wedge held by a retaining pin, so you replace a point instead of the whole attachment when it wears back. Pin bosses are bushed and greasable.
| Machine weight range | 1 – 3.5 tons |
|---|---|
| Pin diameter | 1.57 – 1.97 in. (40 – 50 mm) – pin and bush kit supplied |
| Width between mounting ears | 5.9 – 7.9 in. (150 – 200 mm) – spacer bushes supplied |
| Hydraulics required | None |
Every excavator we sell falls inside that range, so this ripper fits the MX-10, MX-10E, MX-17, MX-25 and MX-35 with the kit that comes in the box. If your machine is not one of ours, send us those three numbers and we will confirm before you order.
| Shank | Single curved hardened plate, 8 in. wide |
|---|---|
| Point | Replaceable hardened wedge, pin retained |
| Overall length | 30 in. |
| Weight | 62 lb |
| Pin bosses | Bushed and greasable |
Covered by the manufacturer’s written warranty supplied with it – ask us for the exact terms in writing before you order. Replacement points, retaining pins and bushes are ordered through us at info@nestiques.com.
WARNING: this product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Looking after it: rip in parallel passes and let the machine do the work with the arm, not by driving the tracks forward. Replace the point once it has worn back to the shank shoulder. Grease the pin bosses whenever you grease the machine.
At 62 lb this is the one attachment that stays inside the USPS 70 lb limit, so it ships free with USPS Ground Advantage, tracked, to any address in the United States. Dispatch takes 1 – 2 business days and transit a further 3 – 6. Unused attachments can be returned within 30 days of delivery.
Discover what customers have shared about their experience shopping with PrimeGear Supply.
“The equipment was exactly what I was looking for. The product information made it easy to understand the machine before ordering.”
“The product details were clear and the shopping process was straightforward. I found exactly the type of equipment I needed.”
“I liked the selection of outdoor products and the detailed product information. Everything was easy to browse and compare.”
“The specifications were very helpful when comparing the different graphics card options. The product page had plenty of useful technical information.”
“There are a lot of different products to choose from, and I appreciated having the specifications available before making a decision.”
“The computer selection gave me several options at different price points. The specifications helped me compare the systems.”
Planetary auger drive with a 12 in. bit for 2 – 4 ton excavators with 8 – 16 gpm. Hoses and pin kit included. Free LTL freight shipping.
18 in. pin-on digging bucket for 1 – 3.5 ton machines. Five bolt-on teeth, pin and bush kit supplied. Free UPS or FedEx Ground shipping.
Three-finger hydraulic thumb for 1 – 3.5 ton excavators. 165 degrees of travel, hoses and pin kit included. Free LTL freight shipping.
Manual pin-grabber coupler for 1 – 3.5 ton excavators. Swap attachments in under a minute. Free UPS or FedEx Ground shipping.
